One of the most common questions people ask themselves about the maintenance of their bicycles is how often should the wheel bearings get greased. However, there is no straight answer to this question as some cyclists suggest that you need to grease your bearings after riding for about 3,000 miles.
Some bearing manufacturers, on the other hand, suggest oiling your bearings once a year.
How do you check wheel bearings?
Sometimes you don’t even have to wait for a year or put wheel bearing oil change on hold for when you reach a certain mileage riding your bike. Checking your wheel bearings can also help you be aware of other problems that are more serious than an oil change.
The most basic way to determine if you will need to grease your wheel bearings is to check if there is any side-to-side play when moving your wheel. If you notice a lot of play, your grease could be used up because it fills up space inside the bearings.
How do you grease bike bearings?
If your bearings are loose, get two adjustable wrenches or flat wrenches that will be able to fit tightly around the bearing cone and the locking nut. When you find the right wrenches, use one to hold the bearing cone in place while using the other one to unscrew the locking nut.
Don’t completely unscrew the locking nut with the wrench; use your fingers to unscrew it and the bearing cone. The side that is now open should be facing upward so you can see if the problem with the bearings is caused by a lack of grease.
What is the best grease for bicycle bearings?
If you see that your bike’s bearings need to get greased and this will be your first time doing this, you need to make sure you use the right lubricant. For example, many road cyclists prefer pouring oil into their bearings to make their bikes go faster when they are rolling.
However, oil allows contaminants like water and dust to get into the bearings. Also, oils tend to leak out faster, so don’t put them in if you are looking for a long term solution.
If you want a longer-lasting lubricant, invest in marine grease or lithium-based grease as these fare better in wet conditions and will prevent your bearings from corroding.
Why is my front bike wheel wobbling?
If you are experiencing a wobble in your bikes front wheel and are sure that it is properly greased, the problem might not even originate from the bike. One of the most common reasons that will cause your front wheels to wobble is that you are traveling too fast.
Another human factor that can cause your front wheel to wobble is that you are either too tense or too cold and are shivering. If your saddle is set too high, you might also start experiencing a wobbly sensation or if you are riding without using your pedals.
How do I make my bike feel like new?
Another factor that can make you think that it is time to grease wheel bearings is simply that your bike is old and doesn’t ride like it used to. In an instance like this, you will have to clean your bike thoroughly with a sponge and soap.
Don’t be afraid to take your bike apart when cleaning it as that will actually make cleaning your bike easier. If you plan on using a hose when cleaning your bike, try not to spray the water at close range and avoid using a high-pressure hose.
How often should you maintain your bike?
To avoid problems with your bike that will make you consider greasing your bearings, try keeping a maintenance checklist. For example, before riding your bike, you can always check your tire pressure, brakes and cables.
If they are alright, you can make sure that your quick release hubs and crank are tight enough. After riding your bike, you can ensure that your wheels are true and that they don’t have any cuts or objects stuck in them. Also, try to clean your bike’s mechanical parts every week.